Isle-Slingers/js/physics/topple/index.js

/* ISLE SLINGERS -- physics/topple/index.js (submodule: topple)
 * RC-375D84 S-3. Boards tip and topple end-over-end (Commander Q1: FULL
 * CONTINUOUS ROTATION). A resting block whose centre of mass lies OUTSIDE the
 * x-span of whatever supports it (ground, or the top face of a block below)
 * begins pivoting about the support-edge corner on the side the COM leans to.
 * The pivot is a fixed point; the board rotates about it under gravity
 * (rigid body, point-mass COM) -- a smooth continuous swing, no snap. When the
 * far end strikes the ground it lands: impact speed = angVel * r drives damage
 * to the board itself and to anything in the swept path (blocks take impact,
 * enemies can be killed). The board then rests at its landed angle.
 *
 * Adds a single rotational degree of freedom (ang, angVel, pivot) to blocks.
 * Blocks that never overhang keep ang=0 forever, so pre-S-3 behaviour is
 * exactly preserved for supported stacks (proven by topple.test arm 3).
 *
 * Installs into the shared physics scope P (same single-scope semantics as the
 * monolith). Must load before js/physics/index.js. Surface installed:
 *   P.toppleBlocks, P.blockSupportSpan
 */
(function (root, factory) {
  var part = factory();
  if (typeof module !== 'undefined' && module.exports) module.exports = part;
  else (root.ISLE_PHYSICS_PARTS = root.ISLE_PHYSICS_PARTS || []).push(part);
})(typeof globalThis !== 'undefined' ? globalThis : this, function () {
  'use strict';
  return function (P) {

  // The x-span [lo, hi] that supports the block, built from the ground and the
  // top faces of live blocks whose top is at (or just below) this block's
  // bottom and which overlap it in x. Returns null if the block is free-
  // falling (nothing directly under it).
  P.blockSupportSpan = function(g, bl) {
    var bottom = bl.y + bl.h / 2;
    var lo = null, hi = null;
    var i, o, oTop, oBot, oLo, oHi;
    // ground support: if the block's bottom sits on the ground line
    if (Math.abs(bottom - P.WORLD.ground) < 2 && Math.abs(bl.vy) < P.REST_SPEED) {
      lo = bl.x - bl.w / 2; hi = bl.x + bl.w / 2;
    }
    for (i = 0; i < g.blocks.length; i++) {
      o = g.blocks[i];
      if (o === bl || o.hp <= 0) continue;
      oTop = o.y - o.h / 2;       // top face of the support block (unrotated support)
      oBot = o.y + o.h / 2;
      oLo = o.x - o.w / 2; oHi = o.x + o.w / 2;
      // o supports bl when o's top face is within a hair below bl's bottom
      if (bottom - oTop > 2 || oTop - bottom > 4) continue;   // not touching
      if (oBot < bottom - 4) continue;
      // x-overlap between bl and o
      var ovlLo = Math.max(bl.x - bl.w / 2, oLo);
      var ovlHi = Math.min(bl.x + bl.w / 2, oHi);
      if (ovlLo >= ovlHi) continue;
      lo = (lo === null) ? ovlLo : Math.min(lo, ovlLo);
      hi = (hi === null) ? ovlHi : Math.max(hi, ovlHi);
    }
    if (lo === null || hi === null) return null;
    return { lo: lo, hi: hi };
  }

  P.toppleBlocks = function(g, dt) {
    var i, bl, sp, margin = 2;
    for (i = 0; i < g.blocks.length; i++) {
      bl = g.blocks[i];
      if (bl.hp <= 0) continue;
      if (bl.pivoting) {
        // support destroyed or block removed mid-swing -> free fall, keep angle
        if (!P.supportStillAlive(g, bl)) { bl.pivoting = false; bl.angVel = 0; continue; }
        P.integrateTopple(g, bl, dt);
        continue;
      }
      // candidate for tipping: must be (nearly) at rest to evaluate support
      if (Math.abs(bl.vy) > P.REST_SPEED * 2 || Math.abs(bl.vx) > P.REST_SPEED * 2) continue;
      if (bl.toppled) {
        // anti-livelock: a swung-and-settled board rests until a REAL knock
        // (displacement > 6px from its settled spot, or a damaging hit, which
        // clears the flag in damageBlock). Gravity settling never moves it
        // that far, so the knife-edge re-tip loop is closed.
        if (Math.abs(bl.x - (bl.restX || bl.x)) + Math.abs(bl.y - (bl.restY || bl.y)) >= 6) {
          bl.toppled = false;
        } else {
          continue;
        }
      }
      sp = P.blockSupportSpan(g, bl);
      if (!sp) continue;                 // free-falling or in the air
      var comX = bl.x;
      if (comX > sp.hi + margin) {
        // COM leans right of the support span -> pivot about the support's
        // top-right corner (the edge of what's underneath, not the board edge)
        P.beginTopple(g, bl, sp.hi, bl.y + bl.h / 2);
      } else if (comX < sp.lo - margin) {
        P.beginTopple(g, bl, sp.lo, bl.y + bl.h / 2);
      }
    }
  }

  P.beginTopple = function(g, bl, px, py) {
    bl.pivoting = true;
    bl.restX = bl.x; bl.restY = bl.y;   // where it sits if the swing settles back
    bl.pivotX = px; bl.pivotY = py;
    // vector from pivot to COM at the start of the swing
    bl.pvx = bl.x - px; bl.pvy = bl.y - py;
    bl.ang = 0; bl.angVel = 0;
    bl.rest = 0;
    g.events.push({ type: 'topple_start', x: bl.x, y: bl.y, mat: bl.mat });
  }

  P.integrateTopple = function(g, bl, dt) {
    var r2 = bl.pvx * bl.pvx + bl.pvy * bl.pvy;
    if (r2 < 1e-6) { bl.pivoting = false; return; }
    // rotate the pivot->COM vector by the current angle to get the live COM
    var c = Math.cos(bl.ang), s = Math.sin(bl.ang);
    var comX = bl.pivotX + bl.pvx * c - bl.pvy * s;
    var comY = bl.pivotY + bl.pvx * s + bl.pvy * c;
    // torque per mass about the pivot: g * (COMx - pivotX);  I/m = r2
    var alpha = P.GRAVITY * (comX - bl.pivotX) / r2;
    bl.angVel += alpha * dt;
    bl.ang += bl.angVel * dt;
    bl.x = comX; bl.y = comY;
    // landing: the far (non-pivot) corners hit the ground line
    var hw = bl.w / 2, hh = bl.h / 2;
    var cx = [ -hw, hw, hw, -hw ], cy = [ -hh, -hh, hh, hh ];
    var landed = false, k, rx0, ry0, rx, ry;
    for (k = 0; k < 4; k++) {
      // corner vector = (pivot->COM) + (COM->corner), rotated by ang
      rx0 = bl.pvx + cx[k]; ry0 = bl.pvy + cy[k];
      rx = rx0 * c - ry0 * s;
      ry = rx0 * s + ry0 * c;
      if (bl.pivotY + ry >= P.WORLD.ground - 0.5) { landed = true; break; }
    }
    if (landed) { P.landTopple(g, bl); return; }
    // settle-back: the pivot is too high for either end to reach the ground,
    // so the board is a damped-free pendulum -- when it swings back through
    // the flat angle, it lands flat on its support (the physical resolution)
    if (bl.ang < 0 && bl.angVel > 0 && bl.ang > -0.06) P.settleBack(g, bl);
    else if (bl.ang > 0 && bl.angVel < 0 && bl.ang < 0.06) P.settleBack(g, bl);
  }

  // true while the block the pivot sits on is still alive (or the pivot is on
  // the ground line). Used to detect a support destroyed mid-swing.
  P.supportStillAlive = function(g, bl) {
    if (Math.abs(bl.pivotY - P.WORLD.ground) < 2) return true;
    var i, o, oTop;
    for (i = 0; i < g.blocks.length; i++) {
      o = g.blocks[i];
      if (o === bl || o.hp <= 0) continue;
      oTop = o.y - o.h / 2;
      if (Math.abs(oTop - bl.pivotY) < 3) {
        if (bl.pivotX >= o.x - o.w / 2 - 1 && bl.pivotX <= o.x + o.w / 2 + 1) return true;
      }
    }
    return false;
  }

  // the board swung back to flat on its support: stop the rotation, rest it
  // flat (COM returns to its exact start point, so no position drift)
  P.settleBack = function(g, bl) {
    bl.angVel = 0;
    bl.ang = 0;
    bl.pivoting = false;
    bl.x = bl.restX; bl.y = bl.restY;  // damped pendulum: it sits back where it was
    bl.toppled = true;   // anti-livelock: don't re-tip until knocked or damaged
    bl.vx = 0; bl.vy = 0; bl.rest = 1;
    g.events.push({ type: 'topple_settle', x: bl.x, y: bl.y, mat: bl.mat });
  }

  P.landTopple = function(g, bl) {
    // impact speed of the COM = tangential speed about the pivot
    var r = Math.hypot(bl.pvx, bl.pvy);
    var impact = Math.abs(bl.angVel) * r;
    // settle: stop the swing, keep the landed angle (board rests propped/flat)
    bl.angVel = 0;
    bl.pivoting = false;
    bl.vx = 0; bl.vy = 0; bl.rest = 1;
    // clamp COM onto the ground line if it dipped below
    if (bl.y + bl.h / 2 > P.WORLD.ground) bl.y = P.WORLD.ground - bl.h / 2;
    if (impact > 60) {
      // the board itself takes impact damage from the slam
      P.damageBlock(g, bl, (impact - 60) * 0.35, 'topple');
      g.events.push({ type: 'topple_land', x: bl.x, y: bl.y, mat: bl.mat, strength: impact });
      g.camera.shake = Math.max(g.camera.shake, Math.min(14, impact / 60));
      // anything in the swept path takes it too: check the board's current
      // rotated extent against live blocks and enemies
      P.topplePathDamage(g, bl, impact);
    }
  }

  P.topplePathDamage = function(g, bl, impact) {
    // rotated corners of the landed board
    var c = Math.cos(bl.ang), s = Math.sin(bl.ang);
    var hw = bl.w / 2, hh = bl.h / 2;
    var cx = [ -hw, hw, hw, -hw ], cy = [ -hh, -hh, hh, hh ];
    var xs = [], ys = [];
    for (var k = 0; k < 4; k++) {
      xs.push(bl.x + cx[k] * c - cy[k] * s);
      ys.push(bl.y + cx[k] * s + cy[k] * c);
    }
    var minX = Math.min.apply(null, xs), maxX = Math.max.apply(null, xs);
    var minY = Math.min.apply(null, ys), maxY = Math.max.apply(null, ys);
    var i, o, spec;
    // blocks in the landed footprint
    for (i = 0; i < g.blocks.length; i++) {
      o = g.blocks[i];
      if (o === bl || o.hp <= 0) continue;
      if (o.x + o.w / 2 < minX || o.x - o.w / 2 > maxX) continue;
      if (o.y + o.h / 2 < minY || o.y - o.h / 2 > maxY) continue;
      P.damageBlock(g, o, impact * 0.4 * P.MATERIALS[o.mat].dmgFactor, 'topple');
    }
    // enemies in the swept footprint can be killed (objective b)
    for (i = 0; i < g.enemies.length; i++) {
      o = g.enemies[i];
      if (o.dead) continue;
      if (o.x + o.r < minX || o.x - o.r > maxX) continue;
      if (o.y + o.r < minY || o.y - o.r > maxY) continue;
      spec = P.ENEMY_TYPES[o.kind];
      if (impact > spec.crushVel) {
        P.damageEnemy(g, o, (impact - spec.crushVel) * 0.004 * spec.crushDmg + 0.35);
        g.events.push({ type: 'crush', x: o.x, y: o.y });
      }
    }
  }
  };
});